MAIN PARAMETERS OF THE WASTE HEAT RECOVERY BOILER AS FOLLOWS
| Boiler type: |
Q160/300-15-0.6 |
| Drawing No. |
FR1519 |
| Flue gas flow |
160,000. |
Nm3/h |
| Inlet Flue gas temperature |
300 |
ºC |
| Rated boiler evaporation |
15 |
t/h |
| Rated steam pressure |
0.60 |
MPa |
| Outlet steam temperature |
165 |
ºC |
| Feedwater temperature |
104 |
ºC |
| Exhaust gas temperature |
165 |
ºC |
| Boiler design efficiency |
46.2 |
% |
| |
| HEATING SURFACE AREA |
| Boiler proper heating surface area |
4554.24 |
m2 |
| Economizer heating surface area |
396.02 |
m2 |
| |
| Boiler hydraulic test |
0.9 |
Mpa |
INTRODUCTION OF THE WASTE HEAT RECOVERY BOILER(HEAT PIPE TYPE COKING LOW TEMPERATURE)
The technology shall be used for coking low temperature flue gas heat recovery , according to the characteristic of coking low-temperature flue gas use heat pipe as heat exchanger assembly, fully playing to the superiority of heat pipe:The heat transfer area shall be arbitraritly dhanged, long distance transfer, control the temperature, high heat transfer efficiency, small fluid resistance, and avoiding the dew point corrosion.
Applicable to coking, carbon, metalurgy, chemical industry, oil refining, ceramics and other industries.
Audited Supplier 
){kind=link}
){kind=link}